Sonos, Unifi, VLAN and Firewalls.

enter image description here

Carrying on from a previous post - Unifi & Sonos VLANs. If you are like me and you have your Sonos Devices segregated on an IoT VLAN and the Sonos Controllers (iPhone etc) on a different VLAN then you will probably need to do some firewalling.

A little Background

VLANs are used for many reasons, segregating networks, preventing multicast packets traversing networks, security amongst other reasons. In this case I wanted all my IoT devices on its own network (VLAN) as there are many security risks with IoT devices and the a separate VLAN for my main LAN. With this I wanted to block all communication from IoT_VLAN to Main_VLAN, however I wanted my Main_VLAN to still be able to communicate with some devices on the IoT_VLAN i.e. Sonos Speakers.

So following on from the previous post where we setup the VLANs and IGMP-Proxying, we will now look at the Unifi Firewalls.

Firewalls work on rules and the rules work in descending order, i.e. if data hits the firewall it will check the rules from the top downwards until it finds a matching rule.

Firewall

In Unifi there are various Rule headings, WAN, LAN and Guest and each has a IN, OUT and LOCAL. For this guide we will be working with LAN IN - the data is coming from the LAN INTO the USG.

Lets create some rules, these will be in order Top to Bottom.

The first rule is created because when the Controller on Main_VLAN creates a connection with the Speaker on IoT_VLAN we want the speaker to be able to talk back to the controller, hence we create a rule to allow established connections but do not allow it to open new connections.

Name - Allow Established
Enabled - On
Rule Applied - Before pre-defined rules
Action - Accept
IPv4 Protocol - All
States - Established and Related
Source - Address group - Any
Destination - Address group - Any

Next Rule is to allow Sonos Speakers to contact Main_VLAN

Name - SONOS_To_Main_VLAN
Enabled - On
Rule Applied - Before predefined rules
Action - Accept
IPv4 Protocol - All
Address Group - Create a group with all the Sonos Speaker IP addresses
Destination - Network - Main_VLAN

Final rule is to block all other data from IoT_VLAN to Main_VLAN

Name - Block IoT_VLAN to Main_VLAN
Enabled - On
Rule Applied - Before predefined rules
Action - Drop
IPv4 protocol - All
Source - Network - IoT_VLAN
Destination - Network - Main_VLAN

And that's it. With these rules devices on IoT_VLAN shouldnt be able to contact devices on Main_VLAN, however Main_VLAN can still contact the Sonos Speakers.

This is what the Rule Page looks like

firewall rule


Author: Swynol

Main Admin